$2148 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015220
Part No: 07535-04
UNSPSC: 41105102
Type: Instrument
Availability: Within 15 days
  • Low-pulsation synchronous flow from multiple channels with no cartridges
  • Machined stainless steel (SS) and anodized aluminum with SS rotor, bearings, and rollers for reliable, continuous-duty operation
    Stackable heads let you expand the number of flow channels
    Compatible with L/S® drives that accept two or more pump heads; 1/10 hp min.
    Load the tubing, latch the occlusion bed, and run the pump — two-stop tubing gives you optimum tension with no adjustment
  • Six roller heads deliver low-pulsation flow
Gear ratio 1:1
Housing Material Anodized Aluminum
Occlusion Fixed
Open-Head Sensor No
Optimum rpm range (rpm) 0.02 to 600
Rollers Six; stainless steel
Rotor material Stainless Steel
Tubing Retention Stopped Tubing
Tubing sizes accepted Two-Stop Tubing Sets: L/S® 13, L/S 14, L/S 16
Description L/S 4-channel multichannel pump head for L/S tubing
Height (mm) 76
Number of Channels 4
Suction Lift (FeetShort) 29
Volume Per Revolution With L/S 13 Tubing (mL) 0.045
Volume Per Revolution With L/S 14 Tubing (mL) 0.16
Width (InchShort) 4.5
Length (mm) 75
Length (InchShort) 2.9375
Max Flow Rate Per Channel (mLmin) 280
Suction lift (m) 8.8
Volume Per Revolution With L/S 16 Tubing (mL) 0.47
Height (InchShort) 3
Min Flow Rate (mLmin) 0.0009
Min Flow Rate Per Channel (mLmin) 0.0009
Pump Series L/S
Width (mm) 114
Does this pump head work with 6421-26 Microbore tubing or is it only possible to use L/S* 13, 14 or 16? When I bought the item, this tubing was suggested by the distributor but I could never get it to work. Looking into the manual, I now realize that this tubing may not be correct.
Answer
The 07535-04 pump head is intended for use with L/S 13, 14, and 16. The 07534-04 is the pump head intended for use with the 2-stop microbore tubing.Answered on 12/11/2009 by Josh from Technical Support
I have a 7523-30 drive and I want to know if this pump head can work with my unit.
Answer
Yes, this pump head will work on your drive, 07523-30.Answered on 9/3/2010 by Mike from Tech Support
I have a 7523-60 drive and I'd like to know if this pump head can work with my unit.
Answer
Yes, it is compatible. The specifications on the 07523-60 product page will let you know which heads are compatible, the multichannel being among those listed.Answered on 5/20/2011 by Jen from Technical Support
I have a 7523-60 pump drive and I want to know if this pump head can work with my unit.
Answer
Yes, that drive meets the 1/10 HP or greater power requirement this multichannel head needs to be compatible.Answered on 5/19/2011 by Jen from Technical Support
I have the Master Flex Consol Drive 77521-40. Will this pump head work with my drive? Also, can you recommend the correct L/S 14 Tygon tubing? Thanks
Answer
Yes, this multichannel drive is compatible with the drive you have. The 2 stop Tygon lab tubing that is compatible with this head is part number 06416-14.Answered on 5/16/2011 by Jen from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015220
Part No: 07535-04
UNSPSC: 41105102
Type: Instrument
Availability: Within 15 days
  • Low-pulsation synchronous flow from multiple channels with no cartridges
  • Machined stainless steel (SS) and anodized aluminum with SS rotor, bearings, and rollers for reliable, continuous-duty operation
    Stackable heads let you expand the number of flow channels
    Compatible with L/S® drives that accept two or more pump heads; 1/10 hp min.
    Load the tubing, latch the occlusion bed, and run the pump — two-stop tubing gives you optimum tension with no adjustment
  • Six roller heads deliver low-pulsation flow
Gear ratio 1:1
Housing Material Anodized Aluminum
Occlusion Fixed
Open-Head Sensor No
Optimum rpm range (rpm) 0.02 to 600
Rollers Six; stainless steel
Rotor material Stainless Steel
Tubing Retention Stopped Tubing
Tubing sizes accepted Two-Stop Tubing Sets: L/S® 13, L/S 14, L/S 16
Description L/S 4-channel multichannel pump head for L/S tubing
Height (mm) 76
Number of Channels 4
Suction Lift (FeetShort) 29
Volume Per Revolution With L/S 13 Tubing (mL) 0.045
Volume Per Revolution With L/S 14 Tubing (mL) 0.16
Width (InchShort) 4.5
Length (mm) 75
Length (InchShort) 2.9375
Max Flow Rate Per Channel (mLmin) 280
Suction lift (m) 8.8
Volume Per Revolution With L/S 16 Tubing (mL) 0.47
Height (InchShort) 3
Min Flow Rate (mLmin) 0.0009
Min Flow Rate Per Channel (mLmin) 0.0009
Pump Series L/S
Width (mm) 114
Does this pump head work with 6421-26 Microbore tubing or is it only possible to use L/S* 13, 14 or 16? When I bought the item, this tubing was suggested by the distributor but I could never get it to work. Looking into the manual, I now realize that this tubing may not be correct.
Answer
The 07535-04 pump head is intended for use with L/S 13, 14, and 16. The 07534-04 is the pump head intended for use with the 2-stop microbore tubing.Answered on 12/11/2009 by Josh from Technical Support
I have a 7523-30 drive and I want to know if this pump head can work with my unit.
Answer
Yes, this pump head will work on your drive, 07523-30.Answered on 9/3/2010 by Mike from Tech Support
I have a 7523-60 drive and I'd like to know if this pump head can work with my unit.
Answer
Yes, it is compatible. The specifications on the 07523-60 product page will let you know which heads are compatible, the multichannel being among those listed.Answered on 5/20/2011 by Jen from Technical Support
I have a 7523-60 pump drive and I want to know if this pump head can work with my unit.
Answer
Yes, that drive meets the 1/10 HP or greater power requirement this multichannel head needs to be compatible.Answered on 5/19/2011 by Jen from Technical Support
I have the Master Flex Consol Drive 77521-40. Will this pump head work with my drive? Also, can you recommend the correct L/S 14 Tygon tubing? Thanks
Answer
Yes, this multichannel drive is compatible with the drive you have. The 2 stop Tygon lab tubing that is compatible with this head is part number 06416-14.Answered on 5/16/2011 by Jen from Technical Support
Customers Also Bought
JMG Part No. 1227024
JMG Part No. 1130575
JMG Part No. 1012933
JMG Part No. 1015195
JMG Part No. 1012063
Related Products
JMG Part No. 1015219

Masterflex L/S Multichannel Pump Head for L/S Tubing; 4-Channel

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015220
Part No: 07535-04
UNSPSC: 41105102
Type: Instrument
Availability: Within 15 days
  • Low-pulsation synchronous flow from multiple channels with no cartridges
  • Machined stainless steel (SS) and anodized aluminum with SS rotor, bearings, and rollers for reliable, continuous-duty operation
    Stackable heads let you expand the number of flow channels
    Compatible with L/S® drives that accept two or more pump heads; 1/10 hp min.
    Load the tubing, latch the occlusion bed, and run the pump — two-stop tubing gives you optimum tension with no adjustment
  • Six roller heads deliver low-pulsation flow
Gear ratio 1:1
Housing Material Anodized Aluminum
Occlusion Fixed
Open-Head Sensor No
Optimum rpm range (rpm) 0.02 to 600
Rollers Six; stainless steel
Rotor material Stainless Steel
Tubing Retention Stopped Tubing
Tubing sizes accepted Two-Stop Tubing Sets: L/S® 13, L/S 14, L/S 16
Description L/S 4-channel multichannel pump head for L/S tubing
Height (mm) 76
Number of Channels 4
Suction Lift (FeetShort) 29
Volume Per Revolution With L/S 13 Tubing (mL) 0.045
Volume Per Revolution With L/S 14 Tubing (mL) 0.16
Width (InchShort) 4.5
Length (mm) 75
Length (InchShort) 2.9375
Max Flow Rate Per Channel (mLmin) 280
Suction lift (m) 8.8
Volume Per Revolution With L/S 16 Tubing (mL) 0.47
Height (InchShort) 3
Min Flow Rate (mLmin) 0.0009
Min Flow Rate Per Channel (mLmin) 0.0009
Pump Series L/S
Width (mm) 114
Does this pump head work with 6421-26 Microbore tubing or is it only possible to use L/S* 13, 14 or 16? When I bought the item, this tubing was suggested by the distributor but I could never get it to work. Looking into the manual, I now realize that this tubing may not be correct.
Answer
The 07535-04 pump head is intended for use with L/S 13, 14, and 16. The 07534-04 is the pump head intended for use with the 2-stop microbore tubing.Answered on 12/11/2009 by Josh from Technical Support
I have a 7523-30 drive and I want to know if this pump head can work with my unit.
Answer
Yes, this pump head will work on your drive, 07523-30.Answered on 9/3/2010 by Mike from Tech Support
I have a 7523-60 drive and I'd like to know if this pump head can work with my unit.
Answer
Yes, it is compatible. The specifications on the 07523-60 product page will let you know which heads are compatible, the multichannel being among those listed.Answered on 5/20/2011 by Jen from Technical Support
I have a 7523-60 pump drive and I want to know if this pump head can work with my unit.
Answer
Yes, that drive meets the 1/10 HP or greater power requirement this multichannel head needs to be compatible.Answered on 5/19/2011 by Jen from Technical Support
I have the Master Flex Consol Drive 77521-40. Will this pump head work with my drive? Also, can you recommend the correct L/S 14 Tygon tubing? Thanks
Answer
Yes, this multichannel drive is compatible with the drive you have. The 2 stop Tygon lab tubing that is compatible with this head is part number 06416-14.Answered on 5/16/2011 by Jen from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015220
Part No: 07535-04
UNSPSC: 41105102
Type: Instrument
Availability: Within 15 days
  • Low-pulsation synchronous flow from multiple channels with no cartridges
  • Machined stainless steel (SS) and anodized aluminum with SS rotor, bearings, and rollers for reliable, continuous-duty operation
    Stackable heads let you expand the number of flow channels
    Compatible with L/S® drives that accept two or more pump heads; 1/10 hp min.
    Load the tubing, latch the occlusion bed, and run the pump — two-stop tubing gives you optimum tension with no adjustment
  • Six roller heads deliver low-pulsation flow
Gear ratio 1:1
Housing Material Anodized Aluminum
Occlusion Fixed
Open-Head Sensor No
Optimum rpm range (rpm) 0.02 to 600
Rollers Six; stainless steel
Rotor material Stainless Steel
Tubing Retention Stopped Tubing
Tubing sizes accepted Two-Stop Tubing Sets: L/S® 13, L/S 14, L/S 16
Description L/S 4-channel multichannel pump head for L/S tubing
Height (mm) 76
Number of Channels 4
Suction Lift (FeetShort) 29
Volume Per Revolution With L/S 13 Tubing (mL) 0.045
Volume Per Revolution With L/S 14 Tubing (mL) 0.16
Width (InchShort) 4.5
Length (mm) 75
Length (InchShort) 2.9375
Max Flow Rate Per Channel (mLmin) 280
Suction lift (m) 8.8
Volume Per Revolution With L/S 16 Tubing (mL) 0.47
Height (InchShort) 3
Min Flow Rate (mLmin) 0.0009
Min Flow Rate Per Channel (mLmin) 0.0009
Pump Series L/S
Width (mm) 114
Does this pump head work with 6421-26 Microbore tubing or is it only possible to use L/S* 13, 14 or 16? When I bought the item, this tubing was suggested by the distributor but I could never get it to work. Looking into the manual, I now realize that this tubing may not be correct.
Answer
The 07535-04 pump head is intended for use with L/S 13, 14, and 16. The 07534-04 is the pump head intended for use with the 2-stop microbore tubing.Answered on 12/11/2009 by Josh from Technical Support
I have a 7523-30 drive and I want to know if this pump head can work with my unit.
Answer
Yes, this pump head will work on your drive, 07523-30.Answered on 9/3/2010 by Mike from Tech Support
I have a 7523-60 drive and I'd like to know if this pump head can work with my unit.
Answer
Yes, it is compatible. The specifications on the 07523-60 product page will let you know which heads are compatible, the multichannel being among those listed.Answered on 5/20/2011 by Jen from Technical Support
I have a 7523-60 pump drive and I want to know if this pump head can work with my unit.
Answer
Yes, that drive meets the 1/10 HP or greater power requirement this multichannel head needs to be compatible.Answered on 5/19/2011 by Jen from Technical Support
I have the Master Flex Consol Drive 77521-40. Will this pump head work with my drive? Also, can you recommend the correct L/S 14 Tygon tubing? Thanks
Answer
Yes, this multichannel drive is compatible with the drive you have. The 2 stop Tygon lab tubing that is compatible with this head is part number 06416-14.Answered on 5/16/2011 by Jen from Technical Support
$2148 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
Customers Also Bought
JMG Part No. 1227024
JMG Part No. 1130575
JMG Part No. 1012933
JMG Part No. 1015195
JMG Part No. 1012063
Related Products
JMG Part No. 1015219