$3700 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015195
Part No: 07528-10
UNSPSC: 41105102
Type: Instrument
Availability: Within 17 days
  • Easy-to-use drives offer precise speed control and digital display of rpm—ideal for metering applications
  • Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)
  • Three digit LED display shows motor rpm — confirm speed setting at a glance
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • LED indicators confirm motor direction
  • Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
  • Separate speed and power (on/off) control — maintain speed setting while turning pump on/off
  • Stackable, splash-resistant ABS plastic housing; IP33 rated
  • Remote control capabilities via a DB9 female connector on back of drive
  • Speed control input: 4 to 20 mA or 0 to 10 VDC
  • Pump direction (CW/CCW) via open collector or contact closure
  • Start/stop via open collector or contact closure
  • Membrane keypad for easy up-front control of speed, direction, and start/stop

These accurate analog console drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications. Remote speed control requires DB9 male connector 07595-45 or cable assembly 07595-47. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL); control start/stop via footswitch 77595-35 or handheld remote 07528-80.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Housing Material ABS Plastic and Aluminum
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.25% (1 rpm at 600 and 300 rpm; 0.1 rpm at 100 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Description Variable-Speed Drive w/ Remote I/O; 600 rpm
Drive Height (InchShort) 8.5
Min RPM (rpm) 6
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Drive Height (mm) 216
Drive Length (mm) 274
Drive Width (InchShort) 8.3125
Max Flow Rate (mLmin) 3400
Drive IP rating IP 33
Max RPM (rpm) 600
Pump Series L/S
Drive Length (InchShort) 10.7968
Drive Width (mm) 211
Min Flow Rate (mLmin) 0.36
Motor (watts) 75
WHAT IS THE HTS CLASS FOR THIS PRODUCT?
Answer
8413.60.0070 is the Harmonization number. The ECCN is EAR99.Answered on 11/28/2012 by Jen from Technical Support
What pressure levels are achievable with this pump?
Answer
This is only for the pump drive or motor of a complete pump system. The pressure will be dictated by the pump head that is used and the specific tubing formulation and size that is used. This can be as little as 15 PSI or as high as 40 PSI max.Answered on 2/26/2014 by Jose from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015195
Part No: 07528-10
UNSPSC: 41105102
Type: Instrument
Availability: Within 17 days
  • Easy-to-use drives offer precise speed control and digital display of rpm—ideal for metering applications
  • Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)
  • Three digit LED display shows motor rpm — confirm speed setting at a glance
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • LED indicators confirm motor direction
  • Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
  • Separate speed and power (on/off) control — maintain speed setting while turning pump on/off
  • Stackable, splash-resistant ABS plastic housing; IP33 rated
  • Remote control capabilities via a DB9 female connector on back of drive
  • Speed control input: 4 to 20 mA or 0 to 10 VDC
  • Pump direction (CW/CCW) via open collector or contact closure
  • Start/stop via open collector or contact closure
  • Membrane keypad for easy up-front control of speed, direction, and start/stop

These accurate analog console drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications. Remote speed control requires DB9 male connector 07595-45 or cable assembly 07595-47. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL); control start/stop via footswitch 77595-35 or handheld remote 07528-80.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Housing Material ABS Plastic and Aluminum
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.25% (1 rpm at 600 and 300 rpm; 0.1 rpm at 100 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Description Variable-Speed Drive w/ Remote I/O; 600 rpm
Drive Height (InchShort) 8.5
Min RPM (rpm) 6
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Drive Height (mm) 216
Drive Length (mm) 274
Drive Width (InchShort) 8.3125
Max Flow Rate (mLmin) 3400
Drive IP rating IP 33
Max RPM (rpm) 600
Pump Series L/S
Drive Length (InchShort) 10.7968
Drive Width (mm) 211
Min Flow Rate (mLmin) 0.36
Motor (watts) 75
WHAT IS THE HTS CLASS FOR THIS PRODUCT?
Answer
8413.60.0070 is the Harmonization number. The ECCN is EAR99.Answered on 11/28/2012 by Jen from Technical Support
What pressure levels are achievable with this pump?
Answer
This is only for the pump drive or motor of a complete pump system. The pressure will be dictated by the pump head that is used and the specific tubing formulation and size that is used. This can be as little as 15 PSI or as high as 40 PSI max.Answered on 2/26/2014 by Jose from Technical Support
Customers Also Bought
JMG Part No. 1015197
JMG Part No. 1015188
JMG Part No. 1109540
JMG Part No. 1109551
JMG Part No. 1011851
Related Products
JMG Part No. 1015313
JMG Part No. 1015312
JMG Part No. 1109624
JMG Part No. 1252849
JMG Part No. 1015198

Masterflex L/S Variable-Speed Drive with Remote I/O; 600 rpm

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015195
Part No: 07528-10
UNSPSC: 41105102
Type: Instrument
Availability: Within 17 days
  • Easy-to-use drives offer precise speed control and digital display of rpm—ideal for metering applications
  • Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)
  • Three digit LED display shows motor rpm — confirm speed setting at a glance
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • LED indicators confirm motor direction
  • Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
  • Separate speed and power (on/off) control — maintain speed setting while turning pump on/off
  • Stackable, splash-resistant ABS plastic housing; IP33 rated
  • Remote control capabilities via a DB9 female connector on back of drive
  • Speed control input: 4 to 20 mA or 0 to 10 VDC
  • Pump direction (CW/CCW) via open collector or contact closure
  • Start/stop via open collector or contact closure
  • Membrane keypad for easy up-front control of speed, direction, and start/stop

These accurate analog console drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications. Remote speed control requires DB9 male connector 07595-45 or cable assembly 07595-47. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL); control start/stop via footswitch 77595-35 or handheld remote 07528-80.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Housing Material ABS Plastic and Aluminum
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.25% (1 rpm at 600 and 300 rpm; 0.1 rpm at 100 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Description Variable-Speed Drive w/ Remote I/O; 600 rpm
Drive Height (InchShort) 8.5
Min RPM (rpm) 6
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Drive Height (mm) 216
Drive Length (mm) 274
Drive Width (InchShort) 8.3125
Max Flow Rate (mLmin) 3400
Drive IP rating IP 33
Max RPM (rpm) 600
Pump Series L/S
Drive Length (InchShort) 10.7968
Drive Width (mm) 211
Min Flow Rate (mLmin) 0.36
Motor (watts) 75
WHAT IS THE HTS CLASS FOR THIS PRODUCT?
Answer
8413.60.0070 is the Harmonization number. The ECCN is EAR99.Answered on 11/28/2012 by Jen from Technical Support
What pressure levels are achievable with this pump?
Answer
This is only for the pump drive or motor of a complete pump system. The pressure will be dictated by the pump head that is used and the specific tubing formulation and size that is used. This can be as little as 15 PSI or as high as 40 PSI max.Answered on 2/26/2014 by Jose from Technical Support
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Q&A
Brand: Masterflex
JMG No: 1015195
Part No: 07528-10
UNSPSC: 41105102
Type: Instrument
Availability: Within 17 days
  • Easy-to-use drives offer precise speed control and digital display of rpm—ideal for metering applications
  • Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)
  • Three digit LED display shows motor rpm — confirm speed setting at a glance
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • LED indicators confirm motor direction
  • Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
  • Separate speed and power (on/off) control — maintain speed setting while turning pump on/off
  • Stackable, splash-resistant ABS plastic housing; IP33 rated
  • Remote control capabilities via a DB9 female connector on back of drive
  • Speed control input: 4 to 20 mA or 0 to 10 VDC
  • Pump direction (CW/CCW) via open collector or contact closure
  • Start/stop via open collector or contact closure
  • Membrane keypad for easy up-front control of speed, direction, and start/stop

These accurate analog console drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications. Remote speed control requires DB9 male connector 07595-45 or cable assembly 07595-47. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL); control start/stop via footswitch 77595-35 or handheld remote 07528-80.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Housing Material ABS Plastic and Aluminum
Motor hp 1/10
Open-Head Sensor No
Power (Hz) 50/60
Remote I/O 4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.25% (1 rpm at 600 and 300 rpm; 0.1 rpm at 100 rpm)
Type of Pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Description Variable-Speed Drive w/ Remote I/O; 600 rpm
Drive Height (InchShort) 8.5
Min RPM (rpm) 6
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Drive Height (mm) 216
Drive Length (mm) 274
Drive Width (InchShort) 8.3125
Max Flow Rate (mLmin) 3400
Drive IP rating IP 33
Max RPM (rpm) 600
Pump Series L/S
Drive Length (InchShort) 10.7968
Drive Width (mm) 211
Min Flow Rate (mLmin) 0.36
Motor (watts) 75
WHAT IS THE HTS CLASS FOR THIS PRODUCT?
Answer
8413.60.0070 is the Harmonization number. The ECCN is EAR99.Answered on 11/28/2012 by Jen from Technical Support
What pressure levels are achievable with this pump?
Answer
This is only for the pump drive or motor of a complete pump system. The pressure will be dictated by the pump head that is used and the specific tubing formulation and size that is used. This can be as little as 15 PSI or as high as 40 PSI max.Answered on 2/26/2014 by Jose from Technical Support
$3700 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
Customers Also Bought
JMG Part No. 1015197
JMG Part No. 1015188
JMG Part No. 1109540
JMG Part No. 1109551
JMG Part No. 1011851
Related Products
JMG Part No. 1015313
JMG Part No. 1015312
JMG Part No. 1109624
JMG Part No. 1252849
JMG Part No. 1015198