$192 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1015182
Part No: 07519-80
UNSPSC: 41105102
Type: Instrument
Availability: Within 14 days
  • Use with L/S® multichannel cartridge pump heads for synchronous, multichannel pumping

Cartridges feature accurate flow rates and adjustable tubing retainers to hold tubing in place — for large cartridges, set tubing retainers to your tube size and you are ready to pump. On small cartridges, optimum retention is preset — simply load tubing and start pumping. Each cartridge accepts microbore and/or L/S® precision pump tubing, please refer to table below.
All cartridges have adjustable occlusion which maintains a bi-directional flow variation of ±5%. Tighten occlusion for higher pressures, loosen for longer tubing life. Combine the input/output of two cartridges to reduce pulsation.
Cartridges are constructed from polycarbonate and glass-filled nylon. Mix small and large cartridges on pump heads that accept both sizes; two small cartridges occupy the same space as one large cartridge.

Housing Material Polycarbonate and Glass-filled Nylon
Occlusion Adjustable Tangential
Open-Head Sensor No
Optimum rpm range (rpm) 0.02 to 600
Tubing Retention Stopped Tubing or Manual
Tubing sizes accepted Microbore two-stop tubing sets, L/S 13, L/S 14
Description L/S small cartridges for 07519-05 and -06 pump heads.
Height (mm) 95
Number of Channels 1
Volume Per Revolution With L/S 13 Tubing (mL) 0.06
Volume Per Revolution With L/S 14 Tubing (mL) 0.21
Width (InchShort) 0.375
Length (mm) 125
Length (InchShort) 4.3125
Max Flow Rate Per Channel (mLmin) 130
Height (InchShort) 3.75
Max Flow Rate (mLmin) 130
Min Flow Rate (mLmin) 0.0015
Min Flow Rate Per Channel (mLmin) 0.0015
Pump Series L/S
Width (mm) 10
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1015182
Part No: 07519-80
UNSPSC: 41105102
Type: Instrument
Availability: Within 14 days
  • Use with L/S® multichannel cartridge pump heads for synchronous, multichannel pumping

Cartridges feature accurate flow rates and adjustable tubing retainers to hold tubing in place — for large cartridges, set tubing retainers to your tube size and you are ready to pump. On small cartridges, optimum retention is preset — simply load tubing and start pumping. Each cartridge accepts microbore and/or L/S® precision pump tubing, please refer to table below.
All cartridges have adjustable occlusion which maintains a bi-directional flow variation of ±5%. Tighten occlusion for higher pressures, loosen for longer tubing life. Combine the input/output of two cartridges to reduce pulsation.
Cartridges are constructed from polycarbonate and glass-filled nylon. Mix small and large cartridges on pump heads that accept both sizes; two small cartridges occupy the same space as one large cartridge.

Housing Material Polycarbonate and Glass-filled Nylon
Occlusion Adjustable Tangential
Open-Head Sensor No
Optimum rpm range (rpm) 0.02 to 600
Tubing Retention Stopped Tubing or Manual
Tubing sizes accepted Microbore two-stop tubing sets, L/S 13, L/S 14
Description L/S small cartridges for 07519-05 and -06 pump heads.
Height (mm) 95
Number of Channels 1
Volume Per Revolution With L/S 13 Tubing (mL) 0.06
Volume Per Revolution With L/S 14 Tubing (mL) 0.21
Width (InchShort) 0.375
Length (mm) 125
Length (InchShort) 4.3125
Max Flow Rate Per Channel (mLmin) 130
Height (InchShort) 3.75
Max Flow Rate (mLmin) 130
Min Flow Rate (mLmin) 0.0015
Min Flow Rate Per Channel (mLmin) 0.0015
Pump Series L/S
Width (mm) 10
Customers Also Bought
JMG Part No. 1015175
JMG Part No. 1015188
JMG Part No. 1012169
JMG Part No. 1076227
JMG Part No. 1076219

Masterflex L/S Small Cartridges for 07519-05 and -06 Pump Heads

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1015182
Part No: 07519-80
UNSPSC: 41105102
Type: Instrument
Availability: Within 14 days
  • Use with L/S® multichannel cartridge pump heads for synchronous, multichannel pumping

Cartridges feature accurate flow rates and adjustable tubing retainers to hold tubing in place — for large cartridges, set tubing retainers to your tube size and you are ready to pump. On small cartridges, optimum retention is preset — simply load tubing and start pumping. Each cartridge accepts microbore and/or L/S® precision pump tubing, please refer to table below.
All cartridges have adjustable occlusion which maintains a bi-directional flow variation of ±5%. Tighten occlusion for higher pressures, loosen for longer tubing life. Combine the input/output of two cartridges to reduce pulsation.
Cartridges are constructed from polycarbonate and glass-filled nylon. Mix small and large cartridges on pump heads that accept both sizes; two small cartridges occupy the same space as one large cartridge.

Housing Material Polycarbonate and Glass-filled Nylon
Occlusion Adjustable Tangential
Open-Head Sensor No
Optimum rpm range (rpm) 0.02 to 600
Tubing Retention Stopped Tubing or Manual
Tubing sizes accepted Microbore two-stop tubing sets, L/S 13, L/S 14
Description L/S small cartridges for 07519-05 and -06 pump heads.
Height (mm) 95
Number of Channels 1
Volume Per Revolution With L/S 13 Tubing (mL) 0.06
Volume Per Revolution With L/S 14 Tubing (mL) 0.21
Width (InchShort) 0.375
Length (mm) 125
Length (InchShort) 4.3125
Max Flow Rate Per Channel (mLmin) 130
Height (InchShort) 3.75
Max Flow Rate (mLmin) 130
Min Flow Rate (mLmin) 0.0015
Min Flow Rate Per Channel (mLmin) 0.0015
Pump Series L/S
Width (mm) 10
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1015182
Part No: 07519-80
UNSPSC: 41105102
Type: Instrument
Availability: Within 14 days
  • Use with L/S® multichannel cartridge pump heads for synchronous, multichannel pumping

Cartridges feature accurate flow rates and adjustable tubing retainers to hold tubing in place — for large cartridges, set tubing retainers to your tube size and you are ready to pump. On small cartridges, optimum retention is preset — simply load tubing and start pumping. Each cartridge accepts microbore and/or L/S® precision pump tubing, please refer to table below.
All cartridges have adjustable occlusion which maintains a bi-directional flow variation of ±5%. Tighten occlusion for higher pressures, loosen for longer tubing life. Combine the input/output of two cartridges to reduce pulsation.
Cartridges are constructed from polycarbonate and glass-filled nylon. Mix small and large cartridges on pump heads that accept both sizes; two small cartridges occupy the same space as one large cartridge.

Housing Material Polycarbonate and Glass-filled Nylon
Occlusion Adjustable Tangential
Open-Head Sensor No
Optimum rpm range (rpm) 0.02 to 600
Tubing Retention Stopped Tubing or Manual
Tubing sizes accepted Microbore two-stop tubing sets, L/S 13, L/S 14
Description L/S small cartridges for 07519-05 and -06 pump heads.
Height (mm) 95
Number of Channels 1
Volume Per Revolution With L/S 13 Tubing (mL) 0.06
Volume Per Revolution With L/S 14 Tubing (mL) 0.21
Width (InchShort) 0.375
Length (mm) 125
Length (InchShort) 4.3125
Max Flow Rate Per Channel (mLmin) 130
Height (InchShort) 3.75
Max Flow Rate (mLmin) 130
Min Flow Rate (mLmin) 0.0015
Min Flow Rate Per Channel (mLmin) 0.0015
Pump Series L/S
Width (mm) 10
$192 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
Customers Also Bought
JMG Part No. 1015175
JMG Part No. 1015188
JMG Part No. 1012169
JMG Part No. 1076227
JMG Part No. 1076219