Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: CEPA
Part No: Z101
Stock: 6-8 weeks

Z series
Fast. Flexible. Resistant.

High-speed tubular centrifuges are used mainly for separating solid components from fermenter suspensions. But this type of centrifuge can also be used to separate two liquids and remove a solid at the same time. The liquid is fed into the rotor from below while the centrifuge is running. The suspension components are stratified by density in the rotor. The liquid(s) is or are discharged continuously via the run-off tray. The solid remains in the rotor.

  • Continuous feed, manual solids discharge
  • Throughput ranging up to 3000 l/h
  • g-force maximum 15500 × g
  • Solids uptake 10 litres (depending on the solid)
Throughput 3000 litres/hour
Speed 14000 rpm
RCF (G-value) 15500 × g
Nominal Capacity 10 litres
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: CEPA
Part No: Z101
Stock: 6-8 weeks

Z series
Fast. Flexible. Resistant.

High-speed tubular centrifuges are used mainly for separating solid components from fermenter suspensions. But this type of centrifuge can also be used to separate two liquids and remove a solid at the same time. The liquid is fed into the rotor from below while the centrifuge is running. The suspension components are stratified by density in the rotor. The liquid(s) is or are discharged continuously via the run-off tray. The solid remains in the rotor.

  • Continuous feed, manual solids discharge
  • Throughput ranging up to 3000 l/h
  • g-force maximum 15500 × g
  • Solids uptake 10 litres (depending on the solid)
Throughput 3000 litres/hour
Speed 14000 rpm
RCF (G-value) 15500 × g
Nominal Capacity 10 litres

Z 101 High-Speed Tubular Centrifuge

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: CEPA
Part No: Z101
Stock: 6-8 weeks

Z series
Fast. Flexible. Resistant.

High-speed tubular centrifuges are used mainly for separating solid components from fermenter suspensions. But this type of centrifuge can also be used to separate two liquids and remove a solid at the same time. The liquid is fed into the rotor from below while the centrifuge is running. The suspension components are stratified by density in the rotor. The liquid(s) is or are discharged continuously via the run-off tray. The solid remains in the rotor.

  • Continuous feed, manual solids discharge
  • Throughput ranging up to 3000 l/h
  • g-force maximum 15500 × g
  • Solids uptake 10 litres (depending on the solid)
Throughput 3000 litres/hour
Speed 14000 rpm
RCF (G-value) 15500 × g
Nominal Capacity 10 litres
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: CEPA
Part No: Z101
Stock: 6-8 weeks

Z series
Fast. Flexible. Resistant.

High-speed tubular centrifuges are used mainly for separating solid components from fermenter suspensions. But this type of centrifuge can also be used to separate two liquids and remove a solid at the same time. The liquid is fed into the rotor from below while the centrifuge is running. The suspension components are stratified by density in the rotor. The liquid(s) is or are discharged continuously via the run-off tray. The solid remains in the rotor.

  • Continuous feed, manual solids discharge
  • Throughput ranging up to 3000 l/h
  • g-force maximum 15500 × g
  • Solids uptake 10 litres (depending on the solid)
Throughput 3000 litres/hour
Speed 14000 rpm
RCF (G-value) 15500 × g
Nominal Capacity 10 litres
Enquiry sent successfully
Product Enquiry