$8017 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Labfriend
JMG No: 8014701
Part No: 6.272 145
Type: Instrument
Availability: 6-8 weeks

OmniaTap

Der Allrounder.
For H2O pure types ASTM I + II.

OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to a drinking water tap. A press on the dispenser button activates dispensing of ultrapure water type ASTM I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type ASTM II quality. The pure water tank has a second outlet for feeding downstream end users.

Omnia Tap 6 typical applications include AAS, IC, ICP, buffer and media preparation

Features

  • OptiFill dispenser is standard
  • TapWater set for direct connection to a drinking water tap
  • 10-litre pure water tank has a pressure outlet
  • Tank volume display in percent
  • Simple and economical filter replacement
  • Leakage sensor is standard
  • Ready-to-use, including filter cartridges
One hand operation
Easy water dispensing
Flexible on a work surface

Flow Chart

ASTM II: Pure water performance l/h at 15 °C 6 or 10
ASTM II: Conductivity µS/cm 0.067 – 0.1
ASTM II: Resistance MΩ x cm 15 – 10
ASTM II: Pure water tank pressurized outlet yes
ASTM I: Conductivit µS/cm 0.055
ASTM I: Resistance MΩ x cm 18.2
ASTM I: TOC-value* ppb 5 – 10
ASTM I: Dispensing performance l/min up to 2
ASTM I: Endotoxins* EU/ml -
ASTM I: Particles**/ml < 1
ASTM I: Bacteria** CFU/ml <0.1
Feedwater requirements: Drinking water according to DIN 2000 -
Feedwater requirements: Feedwater temperature °C + 2 up to 35
Feedwater requirements: Manganese and iron content mg/l < 0.05
Feedwater requirements: Free chlorine content mg/l <1
Feedwater requirements: Silt density index (SDI) max. 3
Technical data: Operating pressure bar 1 - 6
Technical data: Supply voltage Volt/Hz 90-240/50-60
Technical data: Connected load kW 0.1
Technical data: Connector size mm 8 mm hose
Technical data: Ambient temperature °C + 2 up to + 35
Technical data: Dimensions*** W x H x D mm 390 x 720 x 615
Technical data: Weight kg 22
* in dependence on the feedwater quality -
** with sterilizing filter 0.2 µm -
*** with OptiFill Dispenser -
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Labfriend
JMG No: 8014701
Part No: 6.272 145
Type: Instrument
Availability: 6-8 weeks

OmniaTap

Der Allrounder.
For H2O pure types ASTM I + II.

OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to a drinking water tap. A press on the dispenser button activates dispensing of ultrapure water type ASTM I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type ASTM II quality. The pure water tank has a second outlet for feeding downstream end users.

Omnia Tap 6 typical applications include AAS, IC, ICP, buffer and media preparation

Features

  • OptiFill dispenser is standard
  • TapWater set for direct connection to a drinking water tap
  • 10-litre pure water tank has a pressure outlet
  • Tank volume display in percent
  • Simple and economical filter replacement
  • Leakage sensor is standard
  • Ready-to-use, including filter cartridges
One hand operation
Easy water dispensing
Flexible on a work surface

Flow Chart

ASTM II: Pure water performance l/h at 15 °C 6 or 10
ASTM II: Conductivity µS/cm 0.067 – 0.1
ASTM II: Resistance MΩ x cm 15 – 10
ASTM II: Pure water tank pressurized outlet yes
ASTM I: Conductivit µS/cm 0.055
ASTM I: Resistance MΩ x cm 18.2
ASTM I: TOC-value* ppb 5 – 10
ASTM I: Dispensing performance l/min up to 2
ASTM I: Endotoxins* EU/ml -
ASTM I: Particles**/ml < 1
ASTM I: Bacteria** CFU/ml <0.1
Feedwater requirements: Drinking water according to DIN 2000 -
Feedwater requirements: Feedwater temperature °C + 2 up to 35
Feedwater requirements: Manganese and iron content mg/l < 0.05
Feedwater requirements: Free chlorine content mg/l <1
Feedwater requirements: Silt density index (SDI) max. 3
Technical data: Operating pressure bar 1 - 6
Technical data: Supply voltage Volt/Hz 90-240/50-60
Technical data: Connected load kW 0.1
Technical data: Connector size mm 8 mm hose
Technical data: Ambient temperature °C + 2 up to + 35
Technical data: Dimensions*** W x H x D mm 390 x 720 x 615
Technical data: Weight kg 22
* in dependence on the feedwater quality -
** with sterilizing filter 0.2 µm -
*** with OptiFill Dispenser -

Omnia Tap 6

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Labfriend
JMG No: 8014701
Part No: 6.272 145
Type: Instrument
Availability: 6-8 weeks

OmniaTap

Der Allrounder.
For H2O pure types ASTM I + II.

OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to a drinking water tap. A press on the dispenser button activates dispensing of ultrapure water type ASTM I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type ASTM II quality. The pure water tank has a second outlet for feeding downstream end users.

Omnia Tap 6 typical applications include AAS, IC, ICP, buffer and media preparation

Features

  • OptiFill dispenser is standard
  • TapWater set for direct connection to a drinking water tap
  • 10-litre pure water tank has a pressure outlet
  • Tank volume display in percent
  • Simple and economical filter replacement
  • Leakage sensor is standard
  • Ready-to-use, including filter cartridges
One hand operation
Easy water dispensing
Flexible on a work surface

Flow Chart

ASTM II: Pure water performance l/h at 15 °C 6 or 10
ASTM II: Conductivity µS/cm 0.067 – 0.1
ASTM II: Resistance MΩ x cm 15 – 10
ASTM II: Pure water tank pressurized outlet yes
ASTM I: Conductivit µS/cm 0.055
ASTM I: Resistance MΩ x cm 18.2
ASTM I: TOC-value* ppb 5 – 10
ASTM I: Dispensing performance l/min up to 2
ASTM I: Endotoxins* EU/ml -
ASTM I: Particles**/ml < 1
ASTM I: Bacteria** CFU/ml <0.1
Feedwater requirements: Drinking water according to DIN 2000 -
Feedwater requirements: Feedwater temperature °C + 2 up to 35
Feedwater requirements: Manganese and iron content mg/l < 0.05
Feedwater requirements: Free chlorine content mg/l <1
Feedwater requirements: Silt density index (SDI) max. 3
Technical data: Operating pressure bar 1 - 6
Technical data: Supply voltage Volt/Hz 90-240/50-60
Technical data: Connected load kW 0.1
Technical data: Connector size mm 8 mm hose
Technical data: Ambient temperature °C + 2 up to + 35
Technical data: Dimensions*** W x H x D mm 390 x 720 x 615
Technical data: Weight kg 22
* in dependence on the feedwater quality -
** with sterilizing filter 0.2 µm -
*** with OptiFill Dispenser -
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Labfriend
JMG No: 8014701
Part No: 6.272 145
Type: Instrument
Availability: 6-8 weeks

OmniaTap

Der Allrounder.
For H2O pure types ASTM I + II.

OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to a drinking water tap. A press on the dispenser button activates dispensing of ultrapure water type ASTM I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type ASTM II quality. The pure water tank has a second outlet for feeding downstream end users.

Omnia Tap 6 typical applications include AAS, IC, ICP, buffer and media preparation

Features

  • OptiFill dispenser is standard
  • TapWater set for direct connection to a drinking water tap
  • 10-litre pure water tank has a pressure outlet
  • Tank volume display in percent
  • Simple and economical filter replacement
  • Leakage sensor is standard
  • Ready-to-use, including filter cartridges
One hand operation
Easy water dispensing
Flexible on a work surface

Flow Chart

ASTM II: Pure water performance l/h at 15 °C 6 or 10
ASTM II: Conductivity µS/cm 0.067 – 0.1
ASTM II: Resistance MΩ x cm 15 – 10
ASTM II: Pure water tank pressurized outlet yes
ASTM I: Conductivit µS/cm 0.055
ASTM I: Resistance MΩ x cm 18.2
ASTM I: TOC-value* ppb 5 – 10
ASTM I: Dispensing performance l/min up to 2
ASTM I: Endotoxins* EU/ml -
ASTM I: Particles**/ml < 1
ASTM I: Bacteria** CFU/ml <0.1
Feedwater requirements: Drinking water according to DIN 2000 -
Feedwater requirements: Feedwater temperature °C + 2 up to 35
Feedwater requirements: Manganese and iron content mg/l < 0.05
Feedwater requirements: Free chlorine content mg/l <1
Feedwater requirements: Silt density index (SDI) max. 3
Technical data: Operating pressure bar 1 - 6
Technical data: Supply voltage Volt/Hz 90-240/50-60
Technical data: Connected load kW 0.1
Technical data: Connector size mm 8 mm hose
Technical data: Ambient temperature °C + 2 up to + 35
Technical data: Dimensions*** W x H x D mm 390 x 720 x 615
Technical data: Weight kg 22
* in dependence on the feedwater quality -
** with sterilizing filter 0.2 µm -
*** with OptiFill Dispenser -
$8017 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry