Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: ISCO
JMG No: 1098369
Part No: 683700063
Type: Instrument
Availability: In Stock

Portable Samplers

All Isco brand portable samplers are built to withstand harsh environments​. 

  • Vacuum-formed ABS plastic shell withstands exposure and abuse. 
  • Twin-wall construction with foamed-in-place insulation maximizes structural integrity along with the efficiency of ice used for sample preservation. 
  • NEMA 4X, 6 (IP67) controller rating for submersible, watertight, dust-tight, and corrosion resistant service.

Overview

3700 Full-Size Portable Sampler

Full-size performance and flexibility

The full-featured 3700 Sampler collects sequential or composite samples based on time, flow rate, or storm conditions. It's a great choice if you don't need the sophisticated parameter monitoring and logging capabilities of our 6700 Series.

The exclusive LD90 gives you automatic compensation for changes in head height, plus automatic suction line rinsing to prevent cross contamination. The non-contacting liquid sensor is not affected by conductivity, viscosity, temperature, or liquid composition. There are no internal tubing connections, so cleaning and tubing replacement are fast and easy. The 3700 pump outperforms most competing samplers and maintains the EPA-recommended 2 ft/second line velocity at head heights up to 16 feet, with 1/4-inch suction line. For higher lifts, we recommend our 6700 Series.

Ample ice capacity and high-performance insulation in the base keep your samples cool. With 20 lbs of ice in the base and 4 gallons liquid collected at 65°F, the sample temperature is maintained at least 32°F below ambient for 24 hours.

Standard Features

  • Exclusive LD90 Liquid Presence Detector and pump revolution counting system ensure accurate, repeatable sample volumes. 
  • Basic and extended programming modes for: 
    • Uniform time intervals 
    • Non-uniform time intervals 
    • Stormwater runoff sampling 
    • Multiple bottle compositing
    • Split sampling 
  • Thick, foamed-in-place insulation and twin-wall design provide maximum performance in sample preservation. 
  • 3700 Controller is housed in a NEMA 4X and 6 (IP67) environmentally sealed enclosure, and is fully interchangeable between portable and refrigerated samplers.

Applications

  • wastewater effluent 
  • stormwater monitoring 
  • CSO monitoring 
  • permit compliance 
  • pretreatment compliance

Options and Accessories

  • Sequential sampling bottle configurations - 24 x 1 liter polypropylene or 350 ml glass. 
  • Composite sampling bottle configurations (with optional composite base) - 1 x 2.5 gal polyethylene or glass; 1 x 4 gallon polyethylene. 
  • ProPak disposable sample bags 
  • Suction lines and strainers 
  • Samplink® Software for retrieval of sampling logs
​Size (Diam x Ht) 19 x 25 inches (50.5 x 64 cm)
Weight ​Dry, less battery - 37 lbs (16.8 kg)
Materials ABS Plastic
Power requirements 12 VDC
​Pump: Intake Purge Adjustable air purge before and after each sample
​Pump: ​Tubing Life Indicator Provides a warning to change pump tubing
​Pump: ​​Intake Suction Tubing Vinyl or Teflon®; 3/8 inch (1 cm) or 1/4 inch (0.6cm) ID; 3 to 99 feet (1 to 30 m) Length
​Pump: ​​​Pump Tubing Life Recommended 500,000 pump counts
​Pump: ​​​​Maximum Lift 26 ft. (7.9 m)
Pump: ​​​​Repeatability ​±10 ml typical
Pump: ​​​​​Typical Line Velocity at Head Height ​2.5 ft./s @ 3 ft; 2.5 ft./s @ 10 ft; 1.9 ft./s @ 15 ft. (0.76 m/s @ 0.9 m; 0.76 m/s @ 3.1 m; 0.58 m/s @ 4.6 m)
Pump: ​​​​​​Liquid Presence Detector ​Non-wetted, non-conductive sensor detects when liquid sample reaches the pump to automatically compensate for changes in head heights
Controller: Weight 11 lbs (5 kg)
Controller: ​Size (HxWxD) 10 x 12.5 x 10 inches (25 x 32 x 25 cm)
Controller: ​Operational Temperature ​32° to 120°F (0° to 49°C)
Controller: ​​Enclosure Rating NEMA 4X, 6 IP67
Controller:​ Program Memory Non-volatile ROM
Controller:​ ​Flow Meter Signal Input 5 to 15 VDC pulse or 25 ms isolated contact closure
Controller:​ Interface port 8 pin connector; data output at 2400 baud in ASCII. RS-232 format with handshake
Controller:​ ​Clock Accuracy 1 minute per month, typical, for real time clock
​Software: Sample Frequency 1 minute to 99 hours 59 minutes, in 1 minute increments. Non-uniform times in minutes or clock times 1 to 9,999 flow pulses
​Software: Sample pacing ​Uniform time, non-uniform time, flow, flow paced/time switched, STORM (time and flow paced sampling during sample collection.) Flow pacing is controlled by external flow pulses
​Software: ​Multiplexing Samples per bottle (1 to 50 with 1000 ml bottles; 1 to 17 with 350 ml bottles), bottles per sample (1 to 24), multiple bottle compositing
Software: ​Sample volumes ​Programmable from 10 to 9,990 ml in 1 ml increments
Software: ​Sample Retries ​If no sample is detected, up to 3 attempts; user selectable
Software: ​Rinse Cycles ​Automatic rinsing of suction line up to 3 rinses for each sample collection
Software: Program storage 3 sampling programs
Software: Programming modes Basic, extended and STORM
Software: Sampling Stop/Resume Up to 24 real time/date sample stop/resume commands
Software: Controller diagnostics Tests for RAM, ROM, pump display, and distributor
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: ISCO
JMG No: 1098369
Part No: 683700063
Type: Instrument
Availability: In Stock

Portable Samplers

All Isco brand portable samplers are built to withstand harsh environments​. 

  • Vacuum-formed ABS plastic shell withstands exposure and abuse. 
  • Twin-wall construction with foamed-in-place insulation maximizes structural integrity along with the efficiency of ice used for sample preservation. 
  • NEMA 4X, 6 (IP67) controller rating for submersible, watertight, dust-tight, and corrosion resistant service.

Overview

3700 Full-Size Portable Sampler

Full-size performance and flexibility

The full-featured 3700 Sampler collects sequential or composite samples based on time, flow rate, or storm conditions. It's a great choice if you don't need the sophisticated parameter monitoring and logging capabilities of our 6700 Series.

The exclusive LD90 gives you automatic compensation for changes in head height, plus automatic suction line rinsing to prevent cross contamination. The non-contacting liquid sensor is not affected by conductivity, viscosity, temperature, or liquid composition. There are no internal tubing connections, so cleaning and tubing replacement are fast and easy. The 3700 pump outperforms most competing samplers and maintains the EPA-recommended 2 ft/second line velocity at head heights up to 16 feet, with 1/4-inch suction line. For higher lifts, we recommend our 6700 Series.

Ample ice capacity and high-performance insulation in the base keep your samples cool. With 20 lbs of ice in the base and 4 gallons liquid collected at 65°F, the sample temperature is maintained at least 32°F below ambient for 24 hours.

Standard Features

  • Exclusive LD90 Liquid Presence Detector and pump revolution counting system ensure accurate, repeatable sample volumes. 
  • Basic and extended programming modes for: 
    • Uniform time intervals 
    • Non-uniform time intervals 
    • Stormwater runoff sampling 
    • Multiple bottle compositing
    • Split sampling 
  • Thick, foamed-in-place insulation and twin-wall design provide maximum performance in sample preservation. 
  • 3700 Controller is housed in a NEMA 4X and 6 (IP67) environmentally sealed enclosure, and is fully interchangeable between portable and refrigerated samplers.

Applications

  • wastewater effluent 
  • stormwater monitoring 
  • CSO monitoring 
  • permit compliance 
  • pretreatment compliance

Options and Accessories

  • Sequential sampling bottle configurations - 24 x 1 liter polypropylene or 350 ml glass. 
  • Composite sampling bottle configurations (with optional composite base) - 1 x 2.5 gal polyethylene or glass; 1 x 4 gallon polyethylene. 
  • ProPak disposable sample bags 
  • Suction lines and strainers 
  • Samplink® Software for retrieval of sampling logs
​Size (Diam x Ht) 19 x 25 inches (50.5 x 64 cm)
Weight ​Dry, less battery - 37 lbs (16.8 kg)
Materials ABS Plastic
Power requirements 12 VDC
​Pump: Intake Purge Adjustable air purge before and after each sample
​Pump: ​Tubing Life Indicator Provides a warning to change pump tubing
​Pump: ​​Intake Suction Tubing Vinyl or Teflon®; 3/8 inch (1 cm) or 1/4 inch (0.6cm) ID; 3 to 99 feet (1 to 30 m) Length
​Pump: ​​​Pump Tubing Life Recommended 500,000 pump counts
​Pump: ​​​​Maximum Lift 26 ft. (7.9 m)
Pump: ​​​​Repeatability ​±10 ml typical
Pump: ​​​​​Typical Line Velocity at Head Height ​2.5 ft./s @ 3 ft; 2.5 ft./s @ 10 ft; 1.9 ft./s @ 15 ft. (0.76 m/s @ 0.9 m; 0.76 m/s @ 3.1 m; 0.58 m/s @ 4.6 m)
Pump: ​​​​​​Liquid Presence Detector ​Non-wetted, non-conductive sensor detects when liquid sample reaches the pump to automatically compensate for changes in head heights
Controller: Weight 11 lbs (5 kg)
Controller: ​Size (HxWxD) 10 x 12.5 x 10 inches (25 x 32 x 25 cm)
Controller: ​Operational Temperature ​32° to 120°F (0° to 49°C)
Controller: ​​Enclosure Rating NEMA 4X, 6 IP67
Controller:​ Program Memory Non-volatile ROM
Controller:​ ​Flow Meter Signal Input 5 to 15 VDC pulse or 25 ms isolated contact closure
Controller:​ Interface port 8 pin connector; data output at 2400 baud in ASCII. RS-232 format with handshake
Controller:​ ​Clock Accuracy 1 minute per month, typical, for real time clock
​Software: Sample Frequency 1 minute to 99 hours 59 minutes, in 1 minute increments. Non-uniform times in minutes or clock times 1 to 9,999 flow pulses
​Software: Sample pacing ​Uniform time, non-uniform time, flow, flow paced/time switched, STORM (time and flow paced sampling during sample collection.) Flow pacing is controlled by external flow pulses
​Software: ​Multiplexing Samples per bottle (1 to 50 with 1000 ml bottles; 1 to 17 with 350 ml bottles), bottles per sample (1 to 24), multiple bottle compositing
Software: ​Sample volumes ​Programmable from 10 to 9,990 ml in 1 ml increments
Software: ​Sample Retries ​If no sample is detected, up to 3 attempts; user selectable
Software: ​Rinse Cycles ​Automatic rinsing of suction line up to 3 rinses for each sample collection
Software: Program storage 3 sampling programs
Software: Programming modes Basic, extended and STORM
Software: Sampling Stop/Resume Up to 24 real time/date sample stop/resume commands
Software: Controller diagnostics Tests for RAM, ROM, pump display, and distributor
Customers Also Bought

3700 Full-Size Portable Sampler

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: ISCO
JMG No: 1098369
Part No: 683700063
Type: Instrument
Availability: In Stock

Portable Samplers

All Isco brand portable samplers are built to withstand harsh environments​. 

  • Vacuum-formed ABS plastic shell withstands exposure and abuse. 
  • Twin-wall construction with foamed-in-place insulation maximizes structural integrity along with the efficiency of ice used for sample preservation. 
  • NEMA 4X, 6 (IP67) controller rating for submersible, watertight, dust-tight, and corrosion resistant service.

Overview

3700 Full-Size Portable Sampler

Full-size performance and flexibility

The full-featured 3700 Sampler collects sequential or composite samples based on time, flow rate, or storm conditions. It's a great choice if you don't need the sophisticated parameter monitoring and logging capabilities of our 6700 Series.

The exclusive LD90 gives you automatic compensation for changes in head height, plus automatic suction line rinsing to prevent cross contamination. The non-contacting liquid sensor is not affected by conductivity, viscosity, temperature, or liquid composition. There are no internal tubing connections, so cleaning and tubing replacement are fast and easy. The 3700 pump outperforms most competing samplers and maintains the EPA-recommended 2 ft/second line velocity at head heights up to 16 feet, with 1/4-inch suction line. For higher lifts, we recommend our 6700 Series.

Ample ice capacity and high-performance insulation in the base keep your samples cool. With 20 lbs of ice in the base and 4 gallons liquid collected at 65°F, the sample temperature is maintained at least 32°F below ambient for 24 hours.

Standard Features

  • Exclusive LD90 Liquid Presence Detector and pump revolution counting system ensure accurate, repeatable sample volumes. 
  • Basic and extended programming modes for: 
    • Uniform time intervals 
    • Non-uniform time intervals 
    • Stormwater runoff sampling 
    • Multiple bottle compositing
    • Split sampling 
  • Thick, foamed-in-place insulation and twin-wall design provide maximum performance in sample preservation. 
  • 3700 Controller is housed in a NEMA 4X and 6 (IP67) environmentally sealed enclosure, and is fully interchangeable between portable and refrigerated samplers.

Applications

  • wastewater effluent 
  • stormwater monitoring 
  • CSO monitoring 
  • permit compliance 
  • pretreatment compliance

Options and Accessories

  • Sequential sampling bottle configurations - 24 x 1 liter polypropylene or 350 ml glass. 
  • Composite sampling bottle configurations (with optional composite base) - 1 x 2.5 gal polyethylene or glass; 1 x 4 gallon polyethylene. 
  • ProPak disposable sample bags 
  • Suction lines and strainers 
  • Samplink® Software for retrieval of sampling logs
​Size (Diam x Ht) 19 x 25 inches (50.5 x 64 cm)
Weight ​Dry, less battery - 37 lbs (16.8 kg)
Materials ABS Plastic
Power requirements 12 VDC
​Pump: Intake Purge Adjustable air purge before and after each sample
​Pump: ​Tubing Life Indicator Provides a warning to change pump tubing
​Pump: ​​Intake Suction Tubing Vinyl or Teflon®; 3/8 inch (1 cm) or 1/4 inch (0.6cm) ID; 3 to 99 feet (1 to 30 m) Length
​Pump: ​​​Pump Tubing Life Recommended 500,000 pump counts
​Pump: ​​​​Maximum Lift 26 ft. (7.9 m)
Pump: ​​​​Repeatability ​±10 ml typical
Pump: ​​​​​Typical Line Velocity at Head Height ​2.5 ft./s @ 3 ft; 2.5 ft./s @ 10 ft; 1.9 ft./s @ 15 ft. (0.76 m/s @ 0.9 m; 0.76 m/s @ 3.1 m; 0.58 m/s @ 4.6 m)
Pump: ​​​​​​Liquid Presence Detector ​Non-wetted, non-conductive sensor detects when liquid sample reaches the pump to automatically compensate for changes in head heights
Controller: Weight 11 lbs (5 kg)
Controller: ​Size (HxWxD) 10 x 12.5 x 10 inches (25 x 32 x 25 cm)
Controller: ​Operational Temperature ​32° to 120°F (0° to 49°C)
Controller: ​​Enclosure Rating NEMA 4X, 6 IP67
Controller:​ Program Memory Non-volatile ROM
Controller:​ ​Flow Meter Signal Input 5 to 15 VDC pulse or 25 ms isolated contact closure
Controller:​ Interface port 8 pin connector; data output at 2400 baud in ASCII. RS-232 format with handshake
Controller:​ ​Clock Accuracy 1 minute per month, typical, for real time clock
​Software: Sample Frequency 1 minute to 99 hours 59 minutes, in 1 minute increments. Non-uniform times in minutes or clock times 1 to 9,999 flow pulses
​Software: Sample pacing ​Uniform time, non-uniform time, flow, flow paced/time switched, STORM (time and flow paced sampling during sample collection.) Flow pacing is controlled by external flow pulses
​Software: ​Multiplexing Samples per bottle (1 to 50 with 1000 ml bottles; 1 to 17 with 350 ml bottles), bottles per sample (1 to 24), multiple bottle compositing
Software: ​Sample volumes ​Programmable from 10 to 9,990 ml in 1 ml increments
Software: ​Sample Retries ​If no sample is detected, up to 3 attempts; user selectable
Software: ​Rinse Cycles ​Automatic rinsing of suction line up to 3 rinses for each sample collection
Software: Program storage 3 sampling programs
Software: Programming modes Basic, extended and STORM
Software: Sampling Stop/Resume Up to 24 real time/date sample stop/resume commands
Software: Controller diagnostics Tests for RAM, ROM, pump display, and distributor
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: ISCO
JMG No: 1098369
Part No: 683700063
Type: Instrument
Availability: In Stock

Portable Samplers

All Isco brand portable samplers are built to withstand harsh environments​. 

  • Vacuum-formed ABS plastic shell withstands exposure and abuse. 
  • Twin-wall construction with foamed-in-place insulation maximizes structural integrity along with the efficiency of ice used for sample preservation. 
  • NEMA 4X, 6 (IP67) controller rating for submersible, watertight, dust-tight, and corrosion resistant service.

Overview

3700 Full-Size Portable Sampler

Full-size performance and flexibility

The full-featured 3700 Sampler collects sequential or composite samples based on time, flow rate, or storm conditions. It's a great choice if you don't need the sophisticated parameter monitoring and logging capabilities of our 6700 Series.

The exclusive LD90 gives you automatic compensation for changes in head height, plus automatic suction line rinsing to prevent cross contamination. The non-contacting liquid sensor is not affected by conductivity, viscosity, temperature, or liquid composition. There are no internal tubing connections, so cleaning and tubing replacement are fast and easy. The 3700 pump outperforms most competing samplers and maintains the EPA-recommended 2 ft/second line velocity at head heights up to 16 feet, with 1/4-inch suction line. For higher lifts, we recommend our 6700 Series.

Ample ice capacity and high-performance insulation in the base keep your samples cool. With 20 lbs of ice in the base and 4 gallons liquid collected at 65°F, the sample temperature is maintained at least 32°F below ambient for 24 hours.

Standard Features

  • Exclusive LD90 Liquid Presence Detector and pump revolution counting system ensure accurate, repeatable sample volumes. 
  • Basic and extended programming modes for: 
    • Uniform time intervals 
    • Non-uniform time intervals 
    • Stormwater runoff sampling 
    • Multiple bottle compositing
    • Split sampling 
  • Thick, foamed-in-place insulation and twin-wall design provide maximum performance in sample preservation. 
  • 3700 Controller is housed in a NEMA 4X and 6 (IP67) environmentally sealed enclosure, and is fully interchangeable between portable and refrigerated samplers.

Applications

  • wastewater effluent 
  • stormwater monitoring 
  • CSO monitoring 
  • permit compliance 
  • pretreatment compliance

Options and Accessories

  • Sequential sampling bottle configurations - 24 x 1 liter polypropylene or 350 ml glass. 
  • Composite sampling bottle configurations (with optional composite base) - 1 x 2.5 gal polyethylene or glass; 1 x 4 gallon polyethylene. 
  • ProPak disposable sample bags 
  • Suction lines and strainers 
  • Samplink® Software for retrieval of sampling logs
​Size (Diam x Ht) 19 x 25 inches (50.5 x 64 cm)
Weight ​Dry, less battery - 37 lbs (16.8 kg)
Materials ABS Plastic
Power requirements 12 VDC
​Pump: Intake Purge Adjustable air purge before and after each sample
​Pump: ​Tubing Life Indicator Provides a warning to change pump tubing
​Pump: ​​Intake Suction Tubing Vinyl or Teflon®; 3/8 inch (1 cm) or 1/4 inch (0.6cm) ID; 3 to 99 feet (1 to 30 m) Length
​Pump: ​​​Pump Tubing Life Recommended 500,000 pump counts
​Pump: ​​​​Maximum Lift 26 ft. (7.9 m)
Pump: ​​​​Repeatability ​±10 ml typical
Pump: ​​​​​Typical Line Velocity at Head Height ​2.5 ft./s @ 3 ft; 2.5 ft./s @ 10 ft; 1.9 ft./s @ 15 ft. (0.76 m/s @ 0.9 m; 0.76 m/s @ 3.1 m; 0.58 m/s @ 4.6 m)
Pump: ​​​​​​Liquid Presence Detector ​Non-wetted, non-conductive sensor detects when liquid sample reaches the pump to automatically compensate for changes in head heights
Controller: Weight 11 lbs (5 kg)
Controller: ​Size (HxWxD) 10 x 12.5 x 10 inches (25 x 32 x 25 cm)
Controller: ​Operational Temperature ​32° to 120°F (0° to 49°C)
Controller: ​​Enclosure Rating NEMA 4X, 6 IP67
Controller:​ Program Memory Non-volatile ROM
Controller:​ ​Flow Meter Signal Input 5 to 15 VDC pulse or 25 ms isolated contact closure
Controller:​ Interface port 8 pin connector; data output at 2400 baud in ASCII. RS-232 format with handshake
Controller:​ ​Clock Accuracy 1 minute per month, typical, for real time clock
​Software: Sample Frequency 1 minute to 99 hours 59 minutes, in 1 minute increments. Non-uniform times in minutes or clock times 1 to 9,999 flow pulses
​Software: Sample pacing ​Uniform time, non-uniform time, flow, flow paced/time switched, STORM (time and flow paced sampling during sample collection.) Flow pacing is controlled by external flow pulses
​Software: ​Multiplexing Samples per bottle (1 to 50 with 1000 ml bottles; 1 to 17 with 350 ml bottles), bottles per sample (1 to 24), multiple bottle compositing
Software: ​Sample volumes ​Programmable from 10 to 9,990 ml in 1 ml increments
Software: ​Sample Retries ​If no sample is detected, up to 3 attempts; user selectable
Software: ​Rinse Cycles ​Automatic rinsing of suction line up to 3 rinses for each sample collection
Software: Program storage 3 sampling programs
Software: Programming modes Basic, extended and STORM
Software: Sampling Stop/Resume Up to 24 real time/date sample stop/resume commands
Software: Controller diagnostics Tests for RAM, ROM, pump display, and distributor
Enquiry sent successfully
Product Enquiry
Customers Also Bought