$6819 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1256445
Part No: 07551-28
Type: Instrument
Availability: Call For ETA
  • Interface these digital drives to a PC or network for automated lab and process applications--or use as a stand-alone dispensing pump
  • Flow rate 0.001 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
    Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Interface with a PC via RS-232 or USB connection
    Open-head sensor stops the drive when the pump head is opened (when used with sensor-equipped pump head)
    Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle).
    Remote control via DB25 female connector on drive:
    --Speed control input 0 to 20 mA, 4 to 20 mA, or 0 to 10 V;
    --Start/stop/purge and pumping direction requires open collector or contact closure;
    --Tachometer output 0 to 20 mA, 4 to 20 mA, or 0 to 10 V, open collector
    Antidrip function ensures dispensing accuracy.
    Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio

These precision drives offer digital and analog remote control (I/O) options and simple programming—ideal for automated process and network applications. Drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size.
Program the drive via the simple membrane keypad or remotely; keypad lock/unlock feature protects settings. Motor is reversible so you can purge tubing before or after pumping and pump fluid in either direction.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material ABS Plastic and Aluminum
Motor hp 1/10
Open-Head Sensor Yes
Power (Hz) 50/60
Remote I/O RS-232, USB, 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Easy-Load II w/ Open-Head Sensor, Easy-Load II, Easy-Load, Standard, High-Performance, PTFE Tubing, PTFE Diaphragm
Description Computer-Compatible Digital Drive with Open-Head Sensor, 600 rpm, 115/230 VAC
Drive Height (InchShort) 8.5
Min RPM (rpm) 0.1
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Drive Height (mm) 216
Drive Length (mm) 254
Drive Width (InchShort) 8.5
Max Flow Rate (mLmin) 3400
Drive IP rating IP 33
Max RPM (rpm) 600
Motor Height (mm)
Pump Series L/S
Drive Length (InchShort) 10
Drive Width (mm) 216
Min Flow Rate (mLmin) 0.006
Motor (watts) 75
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1256445
Part No: 07551-28
Type: Instrument
Availability: Call For ETA
  • Interface these digital drives to a PC or network for automated lab and process applications--or use as a stand-alone dispensing pump
  • Flow rate 0.001 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
    Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Interface with a PC via RS-232 or USB connection
    Open-head sensor stops the drive when the pump head is opened (when used with sensor-equipped pump head)
    Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle).
    Remote control via DB25 female connector on drive:
    --Speed control input 0 to 20 mA, 4 to 20 mA, or 0 to 10 V;
    --Start/stop/purge and pumping direction requires open collector or contact closure;
    --Tachometer output 0 to 20 mA, 4 to 20 mA, or 0 to 10 V, open collector
    Antidrip function ensures dispensing accuracy.
    Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio

These precision drives offer digital and analog remote control (I/O) options and simple programming—ideal for automated process and network applications. Drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size.
Program the drive via the simple membrane keypad or remotely; keypad lock/unlock feature protects settings. Motor is reversible so you can purge tubing before or after pumping and pump fluid in either direction.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material ABS Plastic and Aluminum
Motor hp 1/10
Open-Head Sensor Yes
Power (Hz) 50/60
Remote I/O RS-232, USB, 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Easy-Load II w/ Open-Head Sensor, Easy-Load II, Easy-Load, Standard, High-Performance, PTFE Tubing, PTFE Diaphragm
Description Computer-Compatible Digital Drive with Open-Head Sensor, 600 rpm, 115/230 VAC
Drive Height (InchShort) 8.5
Min RPM (rpm) 0.1
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Drive Height (mm) 216
Drive Length (mm) 254
Drive Width (InchShort) 8.5
Max Flow Rate (mLmin) 3400
Drive IP rating IP 33
Max RPM (rpm) 600
Motor Height (mm)
Pump Series L/S
Drive Length (InchShort) 10
Drive Width (mm) 216
Min Flow Rate (mLmin) 0.006
Motor (watts) 75

Masterflex L/S Computer-Compatible Digital Drive with Open-Head Sensor, 600 rpm, 115/230 VAC

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1256445
Part No: 07551-28
Type: Instrument
Availability: Call For ETA
  • Interface these digital drives to a PC or network for automated lab and process applications--or use as a stand-alone dispensing pump
  • Flow rate 0.001 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
    Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Interface with a PC via RS-232 or USB connection
    Open-head sensor stops the drive when the pump head is opened (when used with sensor-equipped pump head)
    Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle).
    Remote control via DB25 female connector on drive:
    --Speed control input 0 to 20 mA, 4 to 20 mA, or 0 to 10 V;
    --Start/stop/purge and pumping direction requires open collector or contact closure;
    --Tachometer output 0 to 20 mA, 4 to 20 mA, or 0 to 10 V, open collector
    Antidrip function ensures dispensing accuracy.
    Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio

These precision drives offer digital and analog remote control (I/O) options and simple programming—ideal for automated process and network applications. Drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size.
Program the drive via the simple membrane keypad or remotely; keypad lock/unlock feature protects settings. Motor is reversible so you can purge tubing before or after pumping and pump fluid in either direction.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material ABS Plastic and Aluminum
Motor hp 1/10
Open-Head Sensor Yes
Power (Hz) 50/60
Remote I/O RS-232, USB, 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Easy-Load II w/ Open-Head Sensor, Easy-Load II, Easy-Load, Standard, High-Performance, PTFE Tubing, PTFE Diaphragm
Description Computer-Compatible Digital Drive with Open-Head Sensor, 600 rpm, 115/230 VAC
Drive Height (InchShort) 8.5
Min RPM (rpm) 0.1
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Drive Height (mm) 216
Drive Length (mm) 254
Drive Width (InchShort) 8.5
Max Flow Rate (mLmin) 3400
Drive IP rating IP 33
Max RPM (rpm) 600
Motor Height (mm)
Pump Series L/S
Drive Length (InchShort) 10
Drive Width (mm) 216
Min Flow Rate (mLmin) 0.006
Motor (watts) 75
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: Masterflex
JMG No: 1256445
Part No: 07551-28
Type: Instrument
Availability: Call For ETA
  • Interface these digital drives to a PC or network for automated lab and process applications--or use as a stand-alone dispensing pump
  • Flow rate 0.001 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.
    Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
  • Interface with a PC via RS-232 or USB connection
    Open-head sensor stops the drive when the pump head is opened (when used with sensor-equipped pump head)
    Dispense by Volume in mL (0.001 to 99999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle).
    Remote control via DB25 female connector on drive:
    --Speed control input 0 to 20 mA, 4 to 20 mA, or 0 to 10 V;
    --Start/stop/purge and pumping direction requires open collector or contact closure;
    --Tachometer output 0 to 20 mA, 4 to 20 mA, or 0 to 10 V, open collector
    Antidrip function ensures dispensing accuracy.
    Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio

These precision drives offer digital and analog remote control (I/O) options and simple programming—ideal for automated process and network applications. Drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size.
Program the drive via the simple membrane keypad or remotely; keypad lock/unlock feature protects settings. Motor is reversible so you can purge tubing before or after pumping and pump fluid in either direction.

Whats Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country specific plug/cord set; please specify ultimate destination when ordering.

Control type Digital Variable Speed
Digital dispensing Yes
Housing Material ABS Plastic and Aluminum
Motor hp 1/10
Open-Head Sensor Yes
Power (Hz) 50/60
Remote I/O RS-232, USB, 0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
Reversible motor Yes
Speed Variable
Speed Control ±0.1% (0.1 rpm at 600 rpm)
Type of Pump heads accepted Easy-Load II w/ Open-Head Sensor, Easy-Load II, Easy-Load, Standard, High-Performance, PTFE Tubing, PTFE Diaphragm
Description Computer-Compatible Digital Drive with Open-Head Sensor, 600 rpm, 115/230 VAC
Drive Height (InchShort) 8.5
Min RPM (rpm) 0.1
No. of Pump heads accepted 2
Power (Amps) 2.2
Power (VAC) 90 to 260
Drive Height (mm) 216
Drive Length (mm) 254
Drive Width (InchShort) 8.5
Max Flow Rate (mLmin) 3400
Drive IP rating IP 33
Max RPM (rpm) 600
Motor Height (mm)
Pump Series L/S
Drive Length (InchShort) 10
Drive Width (mm) 216
Min Flow Rate (mLmin) 0.006
Motor (watts) 75
$6819 AUD (Ex. GST)
Qty:
Enquiry sent successfully
Product Enquiry