Part No: SAM255
Availability: 6-8 weeks
Dry your sample
The SAM-255 now with IntelliTemp Infrared temperature control provides rapid drying of all types of samples. The SAM-255 Workstation can analyze large-sized samples for moisture or solids.
- Intellitemp provides consistent drying every day, every batch
- Works great with paint bases and colors
- Ideal for powdered milk
- Reduce drying times from hours to minutes
- Drying comparable to standard air oven method
- Consistent reproducible results
- Stores up to 20 separate methods
- Each method can have up to 8 heating, cooling or heat ramping stages
Time and power selections are independently programmed for each stage. The powerful, variable-speed exhaust system moves air through the cavity quickly to aid in drying and can be connected to an existing laboratory exhaust when drying organic compounds.
Intellitemp™ Makes the Difference
This remarkable system has the patented Intellitemp temperature feedback system which controls microwave energy to maintain a user-defined temperature set-point for verifiable temperature control and repeatable conditions for every test. Incoming line voltage fluctuations are compensated for, providing consistent results unit-to-unit and site-to-site.
SAM 255 Accessories
SAM-255 Work Station
SAM-255’s are available with workstation options including a balance and printer. The SAM-255 Workstation is a complete center for accurate moisture or solids measurements in large samples. The system utilizes the SAM-255’s built-in serial and parallel ports to connect to a balance for weighing and a printer for complete documentation of the process to assist you in complying with ISO and other QC requirements.
The SAM-255 Workstation uses a 100 g balance with 0.0001 g sensitivity for sample weighing. The balance communicates directly with the SAM-255 by a RS-232 port. Once the sample has completed the drying process and has been reweighed, the user can choose to print the sample results and information with the Workstation’s printer.
Draw-Down Card Holder
The ideal solution for proper positioning of the draw-down card in the SAM-255
Bulk Drying Turntable
A two-tier drying basket that holds up to 1,000 g of material to be dried.
Glass Fiber Sample Pads
Designed to hold a variety of sample types including solids, liquids and slurries, CEM sample pads consistently provide superior test accuracy and precision.
CEM offers accessories for the calibration and verification of the temperature control circuitry to meet governmental regulations for various applications. Calibration Source Instrument (NIST traceable)The calibration source instrument and built-in system software allow rapid calibration of the temperature control circuitry of the SAM-255 Systems. A NIST traceable certificate of calibration is supplied with the instrument.
Microwave moisture and solids analyzer
A 600W microwave heating system with variable heating rate. Programmable with up to 20 stored methods of 8 stages each. Each stage can have individually set power levels. Lighted chamber with visual access panel. Continuous drive system which will rotate any accessory turntable at 6 rpm. Programmable variable speed exhaust fan, spare fuses, drying turntable with drive shaft, installation and operation manual.