Enquiry sent successfully
Product Enquiry
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: IMI Sensors
Part No: 686B61
Availability: 3-4 weeks

Vibration Switch
Smart Vibration Switch


Product Specifications
  ENGLISH SI  
Performance
    Alarm Threshold (±10 %) 0.25 to 5 in/sec pk 4.5 to 90 mm/s rms [1] 
    Frequency Range (±3 dB) 420 to 60 kcpm 7 to 1000 Hz  
    Hysteresis (% < alarm=""> 3; 6; or 10 % 3; 6; or 10 % [1] 
    Residual Vibration Level (Reference) Dependent or Independent Dependent or Independent [1] 
    Residual Vibration Level (% Alarm Threshold) 1 to 40 % 1 to 40 % [1] 
    MAVT (Sets Alarm Threshold to 2X actual vibration) Enabled or Disabled Enabled or Disabled [1] 
    Transverse Sensitivity <3> <3>  
    Power On Delay (±1 sec) 3 or 20 sec 3 or 20 sec [1] 
    Startup Delay (±1 sec or 1 min ) (Time) 1 to 60 sec or 1 to 30 min 1 to 60 sec or 1 to 30 min [1] 
    Startup Delay (x Alarm Threshold) x2; x4; x8; Blocked x2; x4; x8; Blocked [1] 
    Startup Delay (Active) Enabled or Disabled Enabled or Disabled [1] 
    Operational Delay (±1 sec) 1 to 60 sec 1 to 60 sec [1] 
    Relay(Type) SPST, Form A or B MOSFET SPST, Form A or B MOSFET  
    Relay(Capacity) 24 to 240 V AC/DC, 500 mA 24 to 240 V AC/DC, 500 mA  
    Relay(Latching) Latching / Non-Latching Latching / Non-Latching [1] 
    Relay(Contacts) Normally Open / Closed Normally Open / Closed [1] 
Control Interface
Environmental
    Temperature Range (Operating) -40 to 185 °F -40 to 85 °C  
    Temperature Range (Storage) -40 to 257 °F -40 to 125 °C  
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Humidity Range (Condensing) 0 to 100 % 0 to 100 %  
Electrical
    Power Required 24 to 240 V DC/AC 50/60 Hz 24 to 240 V DC/AC 50/60 Hz  
    Current Rating (Relay Closed) 500 mA 500 mA  
    Leak Current (Relay Open) 1 mA 1 mA  
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 1.25 in 1.25 in  
    Size - Height 2.6 in 66 mm  
    Weight 5.2 oz 148 gm  
    Mounting Torque 3 to 5 ft-lb 4 to 7 Nm  
    Mounting Thread 1/4-28 Female 1/4-28 Female  
    Sensing Element (Internal) Piezoelectric Accelerometer Piezoelectric Accelerometer  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Molded Molded  
    Electrical Connector Molded Integral Armored Cable Molded Integral Armored Cable  
    Cable Length 10 ft 3 m  
    Cable Termination Blunt cut Blunt cut  
    Electrical Connection Position Top Top  
    Cable Type Polyurethane Polyurethane  

All specifications are at room temperature unless otherwise specified.

CEcsa_us
Product Notes
[1] USB Programmable - See configuration sheet supplied with switch for exact setting.
[2] See PCB Declaration of Conformance PS096 for details.
Accessories:
Supplied
081A41 Mounting stud 1/4-28 socket head set screw brass tip stainless steel 5/8" long (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; Ex nL IICT3, AEx nA IICT3 Cl I, Div 2, Groups A, B, C, D; Ex nL IICT3, AEx nA IICT3
    Power Required 10 to 30 VDC 10 to 30 VDC
    Current Rating (Relay Closed) 100 mA 100 mA
    Relay 10 to 30 VDC, 100 mA 10 to 30 VDC, 100 mA
(M) Metric Mount
Accessories:
     M081A61 Mounting Stud (1)
MAVT (Sets Alarm Threshold to 2X actual vibration) Enabled or Disabled
Relay(Type) SPST, Form A or B MOSFET
Housing Material Stainless Steel
Mounting Torque (SI) 4 to 7 Nm
Temperature Range (Storage) (SI) -40 to 125 °C
Hysteresis (% < Alarm Threshold) 3; 6; or 10 %
Size - Height (English) 2.6 in
Cable Length (English) 10 ft
Residual Vibration Level (% Alarm Threshold) 1 to 40 %
Size - Height (SI) 66 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 7 to 1000 Hz
Relay(Latching) Latching / Non-Latching
Startup Delay (±1 sec or 1 min ) (Time) 1 to 60 sec or 1 to 30 min
Residual Vibration Level (Reference) Dependent or Independent
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Molded
Electrical Isolation (Case) >100000000 Ohm
Relay(Contacts) Normally Open / Closed
Frequency Range (±3 dB) (English) 420 to 60 kcpm
Cable Termination Blunt cut
Cable Length (SI) 3 m
Startup Delay (x Alarm Threshold) x2; x4; x8; Blocked
Cable Type Polyurethane
Temperature Range (Operating) (SI) -40 to 85 °C
Mounting Thread 1/4-28 Female
Power On Delay (±1 sec) 3 or 20 sec
Weight (SI) 148 gm
Weight (English) 5.2 oz
Temperature Range (Operating) (English) -40 to 185 °F
Size - Hex 1.25 in
Operational Delay (±1 sec) 1 to 60 sec
Transverse Sensitivity <3 %
Humidity Range (Condensing) 0 to 100 %
Current Rating (Relay Closed) 500 mA
Power Required 24 to 240 V DC/AC 50/60 Hz
Startup Delay (Active) Enabled or Disabled
Mounting Torque (English) 3 to 5 ft-lb
Temperature Range (Storage) (English) -40 to 257 °F
Leak Current (Relay Open) 1 mA
Sensing Element (Internal) Piezoelectric Accelerometer
Relay(Capacity) 24 to 240 V AC/DC, 500 mA
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: IMI Sensors
Part No: 686B61
Availability: 3-4 weeks

Vibration Switch
Smart Vibration Switch


Product Specifications
  ENGLISH SI  
Performance
    Alarm Threshold (±10 %) 0.25 to 5 in/sec pk 4.5 to 90 mm/s rms [1] 
    Frequency Range (±3 dB) 420 to 60 kcpm 7 to 1000 Hz  
    Hysteresis (% < alarm=""> 3; 6; or 10 % 3; 6; or 10 % [1] 
    Residual Vibration Level (Reference) Dependent or Independent Dependent or Independent [1] 
    Residual Vibration Level (% Alarm Threshold) 1 to 40 % 1 to 40 % [1] 
    MAVT (Sets Alarm Threshold to 2X actual vibration) Enabled or Disabled Enabled or Disabled [1] 
    Transverse Sensitivity <3> <3>  
    Power On Delay (±1 sec) 3 or 20 sec 3 or 20 sec [1] 
    Startup Delay (±1 sec or 1 min ) (Time) 1 to 60 sec or 1 to 30 min 1 to 60 sec or 1 to 30 min [1] 
    Startup Delay (x Alarm Threshold) x2; x4; x8; Blocked x2; x4; x8; Blocked [1] 
    Startup Delay (Active) Enabled or Disabled Enabled or Disabled [1] 
    Operational Delay (±1 sec) 1 to 60 sec 1 to 60 sec [1] 
    Relay(Type) SPST, Form A or B MOSFET SPST, Form A or B MOSFET  
    Relay(Capacity) 24 to 240 V AC/DC, 500 mA 24 to 240 V AC/DC, 500 mA  
    Relay(Latching) Latching / Non-Latching Latching / Non-Latching [1] 
    Relay(Contacts) Normally Open / Closed Normally Open / Closed [1] 
Control Interface
Environmental
    Temperature Range (Operating) -40 to 185 °F -40 to 85 °C  
    Temperature Range (Storage) -40 to 257 °F -40 to 125 °C  
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Humidity Range (Condensing) 0 to 100 % 0 to 100 %  
Electrical
    Power Required 24 to 240 V DC/AC 50/60 Hz 24 to 240 V DC/AC 50/60 Hz  
    Current Rating (Relay Closed) 500 mA 500 mA  
    Leak Current (Relay Open) 1 mA 1 mA  
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 1.25 in 1.25 in  
    Size - Height 2.6 in 66 mm  
    Weight 5.2 oz 148 gm  
    Mounting Torque 3 to 5 ft-lb 4 to 7 Nm  
    Mounting Thread 1/4-28 Female 1/4-28 Female  
    Sensing Element (Internal) Piezoelectric Accelerometer Piezoelectric Accelerometer  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Molded Molded  
    Electrical Connector Molded Integral Armored Cable Molded Integral Armored Cable  
    Cable Length 10 ft 3 m  
    Cable Termination Blunt cut Blunt cut  
    Electrical Connection Position Top Top  
    Cable Type Polyurethane Polyurethane  

All specifications are at room temperature unless otherwise specified.

CEcsa_us
Product Notes
[1] USB Programmable - See configuration sheet supplied with switch for exact setting.
[2] See PCB Declaration of Conformance PS096 for details.
Accessories:
Supplied
081A41 Mounting stud 1/4-28 socket head set screw brass tip stainless steel 5/8" long (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; Ex nL IICT3, AEx nA IICT3 Cl I, Div 2, Groups A, B, C, D; Ex nL IICT3, AEx nA IICT3
    Power Required 10 to 30 VDC 10 to 30 VDC
    Current Rating (Relay Closed) 100 mA 100 mA
    Relay 10 to 30 VDC, 100 mA 10 to 30 VDC, 100 mA
(M) Metric Mount
Accessories:
     M081A61 Mounting Stud (1)
MAVT (Sets Alarm Threshold to 2X actual vibration) Enabled or Disabled
Relay(Type) SPST, Form A or B MOSFET
Housing Material Stainless Steel
Mounting Torque (SI) 4 to 7 Nm
Temperature Range (Storage) (SI) -40 to 125 °C
Hysteresis (% < Alarm Threshold) 3; 6; or 10 %
Size - Height (English) 2.6 in
Cable Length (English) 10 ft
Residual Vibration Level (% Alarm Threshold) 1 to 40 %
Size - Height (SI) 66 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 7 to 1000 Hz
Relay(Latching) Latching / Non-Latching
Startup Delay (±1 sec or 1 min ) (Time) 1 to 60 sec or 1 to 30 min
Residual Vibration Level (Reference) Dependent or Independent
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Molded
Electrical Isolation (Case) >100000000 Ohm
Relay(Contacts) Normally Open / Closed
Frequency Range (±3 dB) (English) 420 to 60 kcpm
Cable Termination Blunt cut
Cable Length (SI) 3 m
Startup Delay (x Alarm Threshold) x2; x4; x8; Blocked
Cable Type Polyurethane
Temperature Range (Operating) (SI) -40 to 85 °C
Mounting Thread 1/4-28 Female
Power On Delay (±1 sec) 3 or 20 sec
Weight (SI) 148 gm
Weight (English) 5.2 oz
Temperature Range (Operating) (English) -40 to 185 °F
Size - Hex 1.25 in
Operational Delay (±1 sec) 1 to 60 sec
Transverse Sensitivity <3 %
Humidity Range (Condensing) 0 to 100 %
Current Rating (Relay Closed) 500 mA
Power Required 24 to 240 V DC/AC 50/60 Hz
Startup Delay (Active) Enabled or Disabled
Mounting Torque (English) 3 to 5 ft-lb
Temperature Range (Storage) (English) -40 to 257 °F
Leak Current (Relay Open) 1 mA
Sensing Element (Internal) Piezoelectric Accelerometer
Relay(Capacity) 24 to 240 V AC/DC, 500 mA

Smart Vibration Switch

OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: IMI Sensors
Part No: 686B61
Availability: 3-4 weeks

Vibration Switch
Smart Vibration Switch


Product Specifications
  ENGLISH SI  
Performance
    Alarm Threshold (±10 %) 0.25 to 5 in/sec pk 4.5 to 90 mm/s rms [1] 
    Frequency Range (±3 dB) 420 to 60 kcpm 7 to 1000 Hz  
    Hysteresis (% < alarm=""> 3; 6; or 10 % 3; 6; or 10 % [1] 
    Residual Vibration Level (Reference) Dependent or Independent Dependent or Independent [1] 
    Residual Vibration Level (% Alarm Threshold) 1 to 40 % 1 to 40 % [1] 
    MAVT (Sets Alarm Threshold to 2X actual vibration) Enabled or Disabled Enabled or Disabled [1] 
    Transverse Sensitivity <3> <3>  
    Power On Delay (±1 sec) 3 or 20 sec 3 or 20 sec [1] 
    Startup Delay (±1 sec or 1 min ) (Time) 1 to 60 sec or 1 to 30 min 1 to 60 sec or 1 to 30 min [1] 
    Startup Delay (x Alarm Threshold) x2; x4; x8; Blocked x2; x4; x8; Blocked [1] 
    Startup Delay (Active) Enabled or Disabled Enabled or Disabled [1] 
    Operational Delay (±1 sec) 1 to 60 sec 1 to 60 sec [1] 
    Relay(Type) SPST, Form A or B MOSFET SPST, Form A or B MOSFET  
    Relay(Capacity) 24 to 240 V AC/DC, 500 mA 24 to 240 V AC/DC, 500 mA  
    Relay(Latching) Latching / Non-Latching Latching / Non-Latching [1] 
    Relay(Contacts) Normally Open / Closed Normally Open / Closed [1] 
Control Interface
Environmental
    Temperature Range (Operating) -40 to 185 °F -40 to 85 °C  
    Temperature Range (Storage) -40 to 257 °F -40 to 125 °C  
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Humidity Range (Condensing) 0 to 100 % 0 to 100 %  
Electrical
    Power Required 24 to 240 V DC/AC 50/60 Hz 24 to 240 V DC/AC 50/60 Hz  
    Current Rating (Relay Closed) 500 mA 500 mA  
    Leak Current (Relay Open) 1 mA 1 mA  
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 1.25 in 1.25 in  
    Size - Height 2.6 in 66 mm  
    Weight 5.2 oz 148 gm  
    Mounting Torque 3 to 5 ft-lb 4 to 7 Nm  
    Mounting Thread 1/4-28 Female 1/4-28 Female  
    Sensing Element (Internal) Piezoelectric Accelerometer Piezoelectric Accelerometer  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Molded Molded  
    Electrical Connector Molded Integral Armored Cable Molded Integral Armored Cable  
    Cable Length 10 ft 3 m  
    Cable Termination Blunt cut Blunt cut  
    Electrical Connection Position Top Top  
    Cable Type Polyurethane Polyurethane  

All specifications are at room temperature unless otherwise specified.

CEcsa_us
Product Notes
[1] USB Programmable - See configuration sheet supplied with switch for exact setting.
[2] See PCB Declaration of Conformance PS096 for details.
Accessories:
Supplied
081A41 Mounting stud 1/4-28 socket head set screw brass tip stainless steel 5/8" long (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; Ex nL IICT3, AEx nA IICT3 Cl I, Div 2, Groups A, B, C, D; Ex nL IICT3, AEx nA IICT3
    Power Required 10 to 30 VDC 10 to 30 VDC
    Current Rating (Relay Closed) 100 mA 100 mA
    Relay 10 to 30 VDC, 100 mA 10 to 30 VDC, 100 mA
(M) Metric Mount
Accessories:
     M081A61 Mounting Stud (1)
MAVT (Sets Alarm Threshold to 2X actual vibration) Enabled or Disabled
Relay(Type) SPST, Form A or B MOSFET
Housing Material Stainless Steel
Mounting Torque (SI) 4 to 7 Nm
Temperature Range (Storage) (SI) -40 to 125 °C
Hysteresis (% < Alarm Threshold) 3; 6; or 10 %
Size - Height (English) 2.6 in
Cable Length (English) 10 ft
Residual Vibration Level (% Alarm Threshold) 1 to 40 %
Size - Height (SI) 66 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 7 to 1000 Hz
Relay(Latching) Latching / Non-Latching
Startup Delay (±1 sec or 1 min ) (Time) 1 to 60 sec or 1 to 30 min
Residual Vibration Level (Reference) Dependent or Independent
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Molded
Electrical Isolation (Case) >100000000 Ohm
Relay(Contacts) Normally Open / Closed
Frequency Range (±3 dB) (English) 420 to 60 kcpm
Cable Termination Blunt cut
Cable Length (SI) 3 m
Startup Delay (x Alarm Threshold) x2; x4; x8; Blocked
Cable Type Polyurethane
Temperature Range (Operating) (SI) -40 to 85 °C
Mounting Thread 1/4-28 Female
Power On Delay (±1 sec) 3 or 20 sec
Weight (SI) 148 gm
Weight (English) 5.2 oz
Temperature Range (Operating) (English) -40 to 185 °F
Size - Hex 1.25 in
Operational Delay (±1 sec) 1 to 60 sec
Transverse Sensitivity <3 %
Humidity Range (Condensing) 0 to 100 %
Current Rating (Relay Closed) 500 mA
Power Required 24 to 240 V DC/AC 50/60 Hz
Startup Delay (Active) Enabled or Disabled
Mounting Torque (English) 3 to 5 ft-lb
Temperature Range (Storage) (English) -40 to 257 °F
Leak Current (Relay Open) 1 mA
Sensing Element (Internal) Piezoelectric Accelerometer
Relay(Capacity) 24 to 240 V AC/DC, 500 mA
OVERVIEW
SPECIFICATIONS
DOWNLOADS
Brand: IMI Sensors
Part No: 686B61
Availability: 3-4 weeks

Vibration Switch
Smart Vibration Switch


Product Specifications
  ENGLISH SI  
Performance
    Alarm Threshold (±10 %) 0.25 to 5 in/sec pk 4.5 to 90 mm/s rms [1] 
    Frequency Range (±3 dB) 420 to 60 kcpm 7 to 1000 Hz  
    Hysteresis (% < alarm=""> 3; 6; or 10 % 3; 6; or 10 % [1] 
    Residual Vibration Level (Reference) Dependent or Independent Dependent or Independent [1] 
    Residual Vibration Level (% Alarm Threshold) 1 to 40 % 1 to 40 % [1] 
    MAVT (Sets Alarm Threshold to 2X actual vibration) Enabled or Disabled Enabled or Disabled [1] 
    Transverse Sensitivity <3> <3>  
    Power On Delay (±1 sec) 3 or 20 sec 3 or 20 sec [1] 
    Startup Delay (±1 sec or 1 min ) (Time) 1 to 60 sec or 1 to 30 min 1 to 60 sec or 1 to 30 min [1] 
    Startup Delay (x Alarm Threshold) x2; x4; x8; Blocked x2; x4; x8; Blocked [1] 
    Startup Delay (Active) Enabled or Disabled Enabled or Disabled [1] 
    Operational Delay (±1 sec) 1 to 60 sec 1 to 60 sec [1] 
    Relay(Type) SPST, Form A or B MOSFET SPST, Form A or B MOSFET  
    Relay(Capacity) 24 to 240 V AC/DC, 500 mA 24 to 240 V AC/DC, 500 mA  
    Relay(Latching) Latching / Non-Latching Latching / Non-Latching [1] 
    Relay(Contacts) Normally Open / Closed Normally Open / Closed [1] 
Control Interface
Environmental
    Temperature Range (Operating) -40 to 185 °F -40 to 85 °C  
    Temperature Range (Storage) -40 to 257 °F -40 to 125 °C  
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk  
    Humidity Range (Condensing) 0 to 100 % 0 to 100 %  
Electrical
    Power Required 24 to 240 V DC/AC 50/60 Hz 24 to 240 V DC/AC 50/60 Hz  
    Current Rating (Relay Closed) 500 mA 500 mA  
    Leak Current (Relay Open) 1 mA 1 mA  
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm  
Physical
    Size - Hex 1.25 in 1.25 in  
    Size - Height 2.6 in 66 mm  
    Weight 5.2 oz 148 gm  
    Mounting Torque 3 to 5 ft-lb 4 to 7 Nm  
    Mounting Thread 1/4-28 Female 1/4-28 Female  
    Sensing Element (Internal) Piezoelectric Accelerometer Piezoelectric Accelerometer  
    Housing Material Stainless Steel Stainless Steel  
    Sealing Molded Molded  
    Electrical Connector Molded Integral Armored Cable Molded Integral Armored Cable  
    Cable Length 10 ft 3 m  
    Cable Termination Blunt cut Blunt cut  
    Electrical Connection Position Top Top  
    Cable Type Polyurethane Polyurethane  

All specifications are at room temperature unless otherwise specified.

CEcsa_us
Product Notes
[1] USB Programmable - See configuration sheet supplied with switch for exact setting.
[2] See PCB Declaration of Conformance PS096 for details.
Accessories:
Supplied
081A41 Mounting stud 1/4-28 socket head set screw brass tip stainless steel 5/8" long (1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
  ENGLISH SI
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; Ex nL IICT3, AEx nA IICT3 Cl I, Div 2, Groups A, B, C, D; Ex nL IICT3, AEx nA IICT3
    Power Required 10 to 30 VDC 10 to 30 VDC
    Current Rating (Relay Closed) 100 mA 100 mA
    Relay 10 to 30 VDC, 100 mA 10 to 30 VDC, 100 mA
(M) Metric Mount
Accessories:
     M081A61 Mounting Stud (1)
MAVT (Sets Alarm Threshold to 2X actual vibration) Enabled or Disabled
Relay(Type) SPST, Form A or B MOSFET
Housing Material Stainless Steel
Mounting Torque (SI) 4 to 7 Nm
Temperature Range (Storage) (SI) -40 to 125 °C
Hysteresis (% < Alarm Threshold) 3; 6; or 10 %
Size - Height (English) 2.6 in
Cable Length (English) 10 ft
Residual Vibration Level (% Alarm Threshold) 1 to 40 %
Size - Height (SI) 66 mm
Electrical Connection Position Top
Overload Limit (Shock) (English) 5000 g pk
Frequency Range (±3 dB) (SI) 7 to 1000 Hz
Relay(Latching) Latching / Non-Latching
Startup Delay (±1 sec or 1 min ) (Time) 1 to 60 sec or 1 to 30 min
Residual Vibration Level (Reference) Dependent or Independent
Overload Limit (Shock) (SI) 49050 m/s² pk
Sealing Molded
Electrical Isolation (Case) >100000000 Ohm
Relay(Contacts) Normally Open / Closed
Frequency Range (±3 dB) (English) 420 to 60 kcpm
Cable Termination Blunt cut
Cable Length (SI) 3 m
Startup Delay (x Alarm Threshold) x2; x4; x8; Blocked
Cable Type Polyurethane
Temperature Range (Operating) (SI) -40 to 85 °C
Mounting Thread 1/4-28 Female
Power On Delay (±1 sec) 3 or 20 sec
Weight (SI) 148 gm
Weight (English) 5.2 oz
Temperature Range (Operating) (English) -40 to 185 °F
Size - Hex 1.25 in
Operational Delay (±1 sec) 1 to 60 sec
Transverse Sensitivity <3 %
Humidity Range (Condensing) 0 to 100 %
Current Rating (Relay Closed) 500 mA
Power Required 24 to 240 V DC/AC 50/60 Hz
Startup Delay (Active) Enabled or Disabled
Mounting Torque (English) 3 to 5 ft-lb
Temperature Range (Storage) (English) -40 to 257 °F
Leak Current (Relay Open) 1 mA
Sensing Element (Internal) Piezoelectric Accelerometer
Relay(Capacity) 24 to 240 V AC/DC, 500 mA
Enquiry sent successfully
Product Enquiry